EV Charger Installation Across London & Kent

Most homes install a 7kW fast charger, these offer a good balance between speed and compatibility with typical UK household electrics. You can choose between tethered (with a fixed cable) and untethered (socket only) based on your preference.

A standard home installation typically takes 3 to 5 hours inclusive of installation & commissioning. More complex installations - such as longer cable runs or consumer unit upgrades - may take longer.

As with every installation we carry out, attention to detail, cleanliness, and pride in our work are top priorities—ensuring you receive a seamless and hassle-free EV charger installation.

Installation costs will vary based on factors such as cable length, which particular EV Charger is being installed, Installation location & where your existing consumer unit is suitable for the addition of your new EV charger. An estimated figure for a standard installation would be £1200 - this would include the EV Charger, Installation, commissioning & Certification including DNO notification.

In short, yes. 

We prefer transparency upfront and a survey allows us to discuss options with you & check things like the cable route, your consumer unit capacity, main fuse rating, Wi-Fi signal strength, and any potential obstructions which then allows us to provide you with a fixed quote. This prevents anydelays and unexpected costs at Installation stage.

We’ve now completed the specialist EV charging course twice, ensuring we stay fully up to date with the latest standards and best practices.

Our lead engineer is an Approved Electrician in the UK, a Qualified Supervisor with the NICEIC, and holds formal qualifications in electrical testing and inspection. With over 20 years of hands-on installation experience—including numerous successful local EV charger installations—you can be confident in the quality of our work.

Selkent Electrical Ltd is NICEIC-registered, giving you peace of mind that all our installations, testing procedures, and safety practices are independently assessed and verified annually.

Many smart chargers rely on a stable Wi-Fi connection to access scheduled charging, off-peak energy tariffs, and software updates. 

If the Wi-Fi signal is weak where the charger will be installed, you might need a signal booster or a wired connection, both of which we can take of for you.

In most cases, no. A 7kW charger usually works with standard UK domestic supplies. However, we will assess your current setup and liaise with your Distribution Network Operator (DNO) if an upgrade or notification is required. If found to be required then we can reduce the loading of your charger internally to allow for installation to take place.

Some electricity suppliers offer EV-friendly or off-peak tariffs, which provide cheaper rates during set nighttime hours. Pairing one of these tariffs with a smart charger can significantly reduce your charging costs. Check with your supplier or use a comparison site to find the best EV tariff for your usage.

Most home chargers use a universal Type 2 connector, which works with the majority of EVs sold in the UK. If you have an untethered charger, you just change the cable to match your new car if needed.